We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Sweep Pump.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Sweep Pump - List of Manufacturers, Suppliers, Companies and Products

Sweep Pump Product List

1～3 item / All 3 items

Displayed results
Jet Sweep Pump "JSP-4 Type/JSP-8 Type" (Recovery)

Jet Sweep Pump "JSP-4 Type/JSP-8 Type" (Recovery)

Complete drainage of residual and low water, and options for water absorption utilizing powerful vacuum capabilities are available to suit various applications!

The "JSP-4 type/JSP-8 type" is a jet sweep pump that can be used with a 100V power supply. Designed with user convenience in mind, it features a simple structure that allows for easy daily maintenance and quick recovery on-site in case of failure. With its uniquely developed vacuum generator, it efficiently generates a vacuum of -0.085MPa (-630mmHg) and is resistant to wear and tear. Additionally, it is equipped not only with suction capabilities but also with a discharge function, allowing for drainage up to a height of 5m, which means it can discharge water up to 50m horizontally. 【Features】 ■ Powerful vacuum pump ■ Low failure rates in various mechanisms and wear resistance ■ Easy maintenance structure ■ Operable even when submerged ■ Strong discharge power *For more details, please refer to the PDF document or feel free to contact us.

  • Industrial Vacuum Cleaners

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drainage pump/sweep pump (drainage)

Drainage pump/sweep pump (drainage)

If you want to lower the water level of drainage or make it as close to zero as possible, we introduce our pumps.

We would like to introduce the drainage pumps/sweep pumps that we handle. Drainage pumps can be used as regular drainage pumps, but they are suitable for situations where you want to lower the water level even further or bring it as close to zero as possible. The drainage water level can be adjusted to approximately 1mm to 13mm. We offer models in both 100V and 200V, and we can also provide automatic drainage auto pumps. 【HSR-2.4S Specifications (Excerpt)】 ■ Output: 0.4kW ■ Phase/Voltage (Three-phase): Single 100V ■ Total lift: 10m ■ Discharge capacity: 0.05m3/min ■ Starting method: Capacitor operation *For more details, please refer to the PDF document or feel free to contact us.

  • 2023-01-06_13h31_26.png
  • 2023-01-06_13h31_32.png
  • 2023-01-06_13h31_40.png
  • 2023-01-06_13h31_44.png
  • 2023-01-06_13h31_48.png
  • Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tsurumi Manufacturing Co., Ltd. Sweep Pump LSP/LSPE Type

Tsurumi Manufacturing Co., Ltd. Sweep Pump LSP/LSPE Type

Low water level / residual water suction and drainage pump

The adoption of the Tsuruumi original high-spin type impeller makes it resistant to wear and has a structure that is less prone to "locking" due to sand and mud. The new siphon breaker mechanism with a check valve prevents backflow of pumped water and water leakage due to siphoning when the pump is stopped. The use of aluminum die-cast and synthetic rubber for major components has achieved weight reduction. It comes with hoses equipped with easy-to-connect fittings on both sides (suction side and pump side). By covering the bottom plate with synthetic rubber, it absorbs shocks to the main body and prevents scratches on the floor. The convex bottom shape allows for easy removal with a plastic hammer during maintenance. It features an electrode-type automatic model (LSPE type). (A) It can operate automatically just by connecting the power supply. (B) It adopts a completely new control method to prevent noise caused by continuous dry operation. The automatic operation method combines a "high-sensitivity electrode" for liquid level detection and a "timer function" to prevent malfunction due to ripples, making it particularly effective for use in densely populated residential areas at night. The operation starts when the water level rises and the electrode touches the water, and then stops after approximately one minute of operation when the water level drops and the water surface moves away from the electrode. *For details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.